Page 14 - IES_ Catalog 2019.indd
P. 14
PLASTIC REPAIR
EASY-SAND (RIGID/FLEXIBLE)
Filler / Surfacer Repair Compound
Sets in approx. 5 minutes*
An easy sanding two-part epoxy adhesive, filler and surfacer designed for repairing most plastics, SMC, fiberglass and other
materials. Use over top of IES™ repair compounds to fill sander marks, low spots and other imperfections (skim coat). Quick
dry, superior feathering.
Working time: 5 Minutes approx
Sandable time: 10 - 20 Min.
Paintable time: 10 - 20 Min.
Full cure: 6 - 8 Hours
Mixed color: Light purple
Each 200 ml Kit comes with two #8260 static mixers.
Each 300 ml Kit comes with three #8260 static mixers.
8080 10 fl. oz. tube kit 4/Box
8480 10 fl. oz. kit (300ml) 4/Box
8680 7.4 fl. oz. kit (220ml) 6/Box
INTER-BOND INTER-CLAD DOUBLE DUTY
LOW VOC ADHESION PROMOTER CLEAR 1K ADHESION PRIMER & SEALER GRAY
Designed to improve adhesion and help prevent paint A 2 in 1 elastomeric coating that facilitates adhesion
peeling on new unfinished plastic parts and previously to TPO, TEO and PP substrates. Has a built
painted surfaces. It modifies the surface properties of in adhesion promoter that saves you time and
“difficult” polyolefin plastics like polypropylene, TPO, TPE, money. Topcoat can be applied without the need
EDPM and other plastics, creating a tie coat between the of sanding or scuffing as soon as it is dry. Ideal for
plastic and the top coat. Works equally well on fiberglass, easy refinishing of new unprimed OEM replacement
aluminum, vinyl, galvanized metal and painted surfaces. bumpers as well as reconditioned bumpers.
Prevents paint peeling on new unfinished plastic Provides superior adhesion to TPO, TEO & PP plastics.
parts and previously painted surfaces. Works on flexible or rigid substrates
Plastic Repair
Easy to use and cost efficient. No sanding or scuffing is required.
Can be topcoated with any type of paint system. Outstanding flexibility
Works on flexible and rigid surfaces. Ideal for easy refinishing of new, unprimed
Low VOC - 50 State Compliant! OEM replacement bumpers.
Made In The U.S.A. 1K Formulation = No Waste (Pour the contents directly back into the can)
Low VOC - 50 State Compliant!
Dry time: 10 minutes @72°F
Top coat: Within one hour 1815 1 Quart (0.95L) 4/Box
1816 1 Gallon Can (3.75L) 1/Box
1810 1 Quart (0.95L) 6/Box
1811 1 Gallon Can (3.75L) 4/Box
REINFORCING MESH FOR PLASTIC WELDING
PLASTIC REPAIR RELEASE FILM Stainless steel reinforcing wire mesh that is designed to be
used with #6018 UNI-FLEX Fiber Ribbon and can be used
A release film used in conjunction with IES on any type of thermoplastic repair. Recommended for use
#70528 Fiberglass Body Repair Tape. For repair for when the tear goes to the edge of the plastic. Can also
of bumper covers, tabs and panel patches. Used be used to fabricate tabs, fill holes and provide additional
with IES Repair Products. reinforcement to any thermoplastic (meltable plastic) repair.
Made from stainless steel (5 times stronger than regular
70540 4" wide x 30 ft. roll 1/Box aluminum wire screen), each piece is 5” x 10” and packaged
10 sheets per box.
6020 5" x 10” sheets 10/Box
11