International Epoxies & Sealers
30241 Commerce Drive
San Antonio, FL 33576
Phone: (800) 451-7206
Fax: (866) 239-0328

70715

3/4 X 108FT SKNOT ON A ROLL  4/BX

This labor saving product is used primarily for reattaching nameplates and emblems. This adhesive eliminates the need to remove the old tape off the back of emblems and nameplates. Also saves time in trimming. Thickness: 2 mil.

  • PART NO: 70710
  • SIZE: 1/2" wide x 108 ft. roll
  • Packaged: 4/BX
  • PART NO: 70715
  • SIZE: 3/4" wide x 108 ft. roll
  • Packaged: 4/BX


70595

A/C INS.TAPE(CORK)1/8X2X30FT  1/BX

This tape eliminates sweating, condensation and dripping of refrigeration lines. Insulates A/C components to prevent dripping and ice buildup. Also improved A/C efficiency.

  • PART NO:  70595
  • SIZE: 1/8" x 2" x 30 ft
  • Packaged:  1/BX


70710

1/2 X 108FT SKNOT ON A ROLL  4/BX

This labor saving product is used primarily for reattaching nameplates and emblems. This adhesive eliminates the need to remove the old tape off the back of emblems and nameplates. Also saves time in trimming. Thickness: 2 mil.

  • PART NO: 70710
  • SIZE: 1/2" wide x 108 ft. roll
  • Packaged: 4/BX
  • PART NO: 70715
  • SIZE: 3/4" wide x 108 ft. roll
  • Packaged: 4/BX

TDS 

70740

TRIM LIFT TAPE 10MM EDGE X 10M  1/BX

A specially designed masking tape with a flexible, clear plastic edge used in masking around sunroofs, tail lights and windshields. The tape is 10 meters long, 45mm wide with a clear plastic edge measuring 10mm. Perforated every 50mm to customize the amount you need for your job.


70750

1/8 X 36 YARDS FINE LINE TAPE  4/BX

Created with a resilient PVC film substrate resulting in good solvent resistance, great conformability and a smooth, sharp, mask-off edge. Ideal for OEM automotive high-temp masking, aftermarket auto body fineline masking, lettering striping, creating two-tone separation lines, curved or sharp lines, irregular panels and on many other complex or irregular surfaces. Offers high temperature resistance through bake cycles up to 311°F for 45 min.

  • PART NO: 70750
  • SIZE: 1/8" wide x 36 yds.
  • Packaged: 4/BX
  • PART NO: 70751
  • SIZE: 1/4" wide x 36 yds.
  • Packaged: 4/BX
  • PART NO: 70752
  • SIZE: 3/8" wide x 36 yds.
  • Packaged: 4/BX
  • PART NO: 70753
  • SIZE: 1/2" wide x 36 yds.
  • Packaged: 4/BX

TDS 

70751

1/4 X 36 YARDS FINE LINE TAPE  4/BX

Created with a resilient PVC film substrate resulting in good solvent resistance, great conformability and a smooth, sharp, mask-off edge. Ideal for OEM automotive high-temp masking, aftermarket auto body fineline masking, lettering striping, creating two-tone separation lines, curved or sharp lines, irregular panels and on many other complex or irregular surfaces. Offers high temperature resistance through bake cycles up to 311°F for 45 min.

  • PART NO: 70750
  • SIZE: 1/8" wide x 36 yds.
  • Packaged: 4/BX
  • PART NO: 70751
  • SIZE: 1/4" wide x 36 yds.
  • Packaged: 4/BX
  • PART NO: 70752
  • SIZE: 3/8" wide x 36 yds.
  • Packaged: 4/BX
  • PART NO: 70753
  • SIZE: 1/2" wide x 36 yds.
  • Packaged: 4/BX


70752

3/8 X 36 YARDS FINE LINE TAPE  4/BX

Created with a resilient PVC film substrate resulting in good solvent resistance, great conformability and a smooth, sharp, mask-off edge. Ideal for OEM automotive high-temp masking, aftermarket auto body fineline masking, lettering striping, creating two-tone separation lines, curved or sharp lines, irregular panels and on many other complex or irregular surfaces. Offers high temperature resistance through bake cycles up to 311°F for 45 min.

  • PART NO: 70750
  • SIZE: 1/8" wide x 36 yds.
  • Packaged: 4/BX
  • PART NO: 70751
  • SIZE: 1/4" wide x 36 yds.
  • Packaged: 4/BX
  • PART NO: 70752
  • SIZE: 3/8" wide x 36 yds.
  • Packaged: 4/BX
  • PART NO: 70753
  • SIZE: 1/2" wide x 36 yds.
  • Packaged: 4/BX


70753

1/2 X 36 YARDS FINE LINE TAPE  4/BX

Created with a resilient PVC film substrate resulting in good solvent resistance, great conformability and a smooth, sharp, mask-off edge. Ideal for OEM automotive high-temp masking, aftermarket auto body fineline masking, lettering striping, creating two-tone separation lines, curved or sharp lines, irregular panels and on many other complex or irregular surfaces. Offers high temperature resistance through bake cycles up to 311°F for 45 min.

  • PART NO: 70750
  • SIZE: 1/8" wide x 36 yds.
  • Packaged: 4/BX
  • PART NO: 70751
  • SIZE: 1/4" wide x 36 yds.
  • Packaged: 4/BX
  • PART NO: 70752
  • SIZE: 3/8" wide x 36 yds.
  • Packaged: 4/BX
  • PART NO: 70753
  • SIZE: 1/2" wide x 36 yds.
  • Packaged: 4/BX

TDS 

70760

3/4 X 12FT BSR FELT TAPE  1/BX

High density felt-like material designed for use on interior trim panels, dash boards, consoles and other various areas where buzzing, squeaks, rattles and chirps occur. High strength acrylic adhesive keeps tape in place. Also referred to as the "anti-squeak tape" or "squeal reduction tape".

Rolls and sheets to fit any application. Easy to apply!

  • PART NO: 70760
  • SIZE: 3/4: wide x 12 ft.
  • Packaged: 1/BX


70762

2 X 12 FT BSR FELT TAPE  1/BX

High density felt-like material designed for use on interior trim panels, dash boards, consoles and other various areas where buzzing, squeaks, rattles and chirps occur. High strength acrylic adhesive keeps tape in place. Also referred to as the "anti-squeak tape" or "squeal reduction tape".

Rolls and sheets to fit any application. Easy to apply!

  • PART NO: 70762
  • SIZE: 2" wide x 12 ft.
  • Packaged: 1/BX


70764

12 X 12 BSR FELT SHEETS 2 PER PACKAGE 2/BX

High density felt-like material designed for use on interior trim panels, dash boards, consoles and other various areas where buzzing, squeaks, rattles and chirps occur. High strength acrylic adhesive keeps tape in place. Also referred to as the "anti-squeak tape" or "squeal reduction tape".

Rolls and sheets to fit any application. Easy to apply!

  • PART NO: 70764
  • SIZE: 12" x 12" sheet
  • Packaged: 2/BX


70530

2X 60 YDS. BLACK GAFFERS TAPE  1/BX

A high quality, strong cloth backed tape. Designed for long life applications. Provides excellent protection to autobody parts when sanding, grinding or sandblasting nearby. Moisture resistant and has instant adhesion.

  • PART NO: 70530
  • SIZE: 2" wide x 60 yds.
  • Packaged: 1/BX

TDS 

70525

2 X 50 FT. ALUMINUM BODY TAPE  1/BX

Ideal for reinforcing parts to be repaired when using epoxy repair compounds. Special "high-tack" adhesive.

  • PART NO:  70525
  • SIZE:  2" Wide x 50 ft. Roll
  • Packaged:  1/BX


70528

2 X 150 FT. FIBERGLASS MESH TAPE 1/BX

A fiberglass mesh tape with a high-tack adhesive on one side for easy positioning. Used with epoxy repair compounds to give additional strength and support.

  • PART NO:  70528
  • SIZE:  1-7/8" Wide x 150 ft. Roll
  • Packaged:  1/BX
  • PART NO:  70535
  • SIZE:  6" Wide x 75 ft. Roll
  • Packaged:  1/BX


70559

INTER-FUSE TAPE 1X 11FT(6-PK)  6/BX

A self-fusing cold shrink tape. Seals out moisture and insulates. Requires no heat. For insulating electrical, pipe, automotive and marine repairs. Insulates up to 430 volts.

  • PART NO: 70560
  • SIZE: 3/4" x 30ft.
  • Packaged: 1/BX
  • PART NO: 70558
  • SIZE: 1" x 11 ft.
  • Packaged: 1/BX
  • PART NO: 70559
  • SIZE: 1" x 11 ft.
  • Packaged: 6/BX


70560

INTER-FUSE SEAL TAPE 3/4X30FT  1/BX

N/A


70576

1/4WIDE X 100FT EDGE CUTTING TAPE 1/BX

PROLINE is the original double-sided edge-cutting tape, known for its unique high-tack, copolymer adhesive that sticks instantly while allowing for unlimited repositioning. The fine crepe-paper body of PROLINE tape allows the applicator to tear the tape manually and position it around curves and irregular surfaces with ease. The unique thickness and body of PROLINE enables precise placement and conformity to nearly any shape or surface.

  • PART NO: 70576
  • SIZE: 1/4" Wide x 100 ft.
  • Packaged:  1/BX